Description
TRA-WIK® and TWL® adapter plates are required for substrates that require greater axial spacing between the screws than 100 mm.
The support bracket is fastened to the front and rear adaptor plate with hex head screws, hexagon nuts and washers.
The adapter plates are anchored to the substrate using injection-threaded rods, bolt anchors or screw-plugs with Ø 10 mm.
First, the support bracket is mounted on the adapter plate. The adapter plate with the pre-assembled support bracket is then mounted on the substrate.
Characteristics
| Length: |
290 / 520 mm |
| Number of fastening points: |
3 / 5 Pc. |
| Material: |
hot-dip galvanised steel |
| Thickness: |
3 mm |
| Note: |
Masonry mounting
with FIS A M10 x 110 injection-
threaded rods and FIS H 16 x 85 K
injection anchor sleeves
Mounting in concrete
with FIS A M10 x 110 injection-
threaded rods |
| Scope of delivery: |
incl. fastening material
for fastening the heavy-load
corbel to the adapter plate,
excl. supporting bracket and
fastening material for substrate
mounting |
